High Tech Line Session 45

Original price was: $679.00.Current price is: $543.00.

Dimensions 145 x 44cm – 2,9kg
All kiteboards come with a handle and a set of 4 fins

Availability: 3 in stock

SKU: SpHTSESSION Category: Tag:

The Kiteboard for every condition!


The High Tech SESSION is the best mix of lightwind and freeride. No other kiteboard provides you with a better tuning for this. The perfect all-in-one kiteboard.

The SESSION is the best freeride kiteboard for the big guys and a great lightwind kiteboard for lightweights.

If you choose a 1-kiteboard strategy, the SESSION provides you with the perfect all-in-one setup. It covers a large windrange with maximum kitesurf fun. Whether gentle breeze or a lot of power in your kite – with the SESSION 45 you always have the right kiteboard on your feet.

Range of use of the SPLEENE SESSION 45

Highlights of the SESSION 45 in detail

Lightwind Freeride Kiteboard

The SESSION is the lightwind freeride kiteboard from SPLEENE. Thanks to the low weight and the balance between bending curve, flex, outline and bottom shape, you can already glide with the SESSION in very little wind. With its sporty design, you have full control at all times, even when the wind picks up. Choppy water? No problem with the SESSION!

The SESSION is the optimal mix of lightwind and freeride. For the heavy kiter (> 100 kg) the SESSION is THE freeride board. Light kiter have with the SESSION the lightwind weapon under their feet. For kite beginners it guarantees a steep learning curve. Or you can’t decide whether to RIP or DOOR? Then the SESSION is your perfect all-in-one kiteboard.

Effortless upwind riding

In light winds, the biggest challenge is getting back to where you started. Especially when the wind is enough to do some trick, which costs you decent height. This is where the SESSION scores. With its slight concave in the middle of the kiteboard, it pulls you upwind fantastically well. The concave is not as extreme as the DOOR, so the freeride characteristics come close to those of the RIP. The fin arrangement is chosen like the RIP, i.e. all four fins sit at the board edge. You can easily start or land your freestyle tricks switch.

In the SESSION are 20 years of concentrated experience in the development of kiteboards. That makes the difference. You will feel it immediately on the water.

Excellent jumping

What makes kiting fun even in light winds? Of course – you want to jump! Thanks to the sporty upgrade, we were able to noticeably improve the jumping characteristics of the SESSION. With the firmer tuning it has significantly more pop.

The more aggressive outline gives you more edge pressure. With this, the SESSION can be loaded up properly to shoot you powerfully into the airspace of your home spot. With the Advanced Jet Bottom, the SESSION releases smoothly from the water and sets you down again gently.

Direct feeling & maximum control

The SESSION shows its strengths in low and medium wind ranges. It brings you enormously early into the glide, wind holes you simply drive through and it feels super agile.

With the sophisticated overall construction you have full control over the kiteboard at all times. The heart of the SESSION is the 3D milled wood core, embedded in the Spider Frame 3D deck. Only wood – no other material in this world – gives you a better riding experience during your moves.

With its extremely low weight, which puts some carbon boards in the shade, the SESSION feels absolutely playful and ultra direct. Cruising, switching, carving and charging for jumps – with the SESSION it’s all playful.

High comfort

Comfort is one of the most important features of our High Tech Line. Thanks to the flex of the Spider Frame 3D deck as well as the Advanced Jet Bottom, impacts are effectively absorbed and allow you to ride smoothly even in choppy water.

The 3D milled wood core provides a very smooth ride and natural damping. Even during long sessions your knees and joints are protected. Choppy water has never been an issue with SPLEENE kiteboards. We simply know how to design the outline of a kiteboard to completely eliminate the annoying splash water.

What’s the technology behind the SPLEENE High Tech Session?

Since birth of Spleene Kiteboarding in 2002, a lot happened. Our total know how has evolved into the 9th generation of our High Tech Line.

Advanced Jet Bottom

The bottom shape is characterized by a channel with double concaves. This allows the kiteboard to glide significantly earlier and more freely than conventional bottoms. Instead of a simple radius, the SPLEENE Advanced Jet Bottom uses a parabolic shape.

With our Advanced Jet Bottom you have significantly more grip, the water is pushed along the edges. In choppy conditions, the effect is particularly noticeable. Like a racing boat, the water surface is broken up by the sophisticated bottom shape. Your jumps end in buttery soft landings.

Shark Skin Surface

The bottom of the kiteboard is built with a special technique. This gives the kiteboard the Shark Skin effect with reduced friction. The result is faster planing and higher speed. You will feel that immediately.

Wood-Core

All SPLEENE Kiteboarding High Tech Line Kiteboards are produced with a CNC milled wood core glued in shape. Thanks to the outstanding
damping characteristics of wood, the SPLEENE Kiteboards have a very high ride comfort and also protect the joints for many hours. of
riding.

Beveled Rail

The slight elevation on the side of the kiteboard increases comfort enormously. This makes kitesurfing a lot easier without cutting or
splashing water — especially in harsh conditions.

Spider Frame 3D Deck

The upper deck of the Spleene Kiteboard is equipped with the new Spider Frame 3D structure. In the area of the grab handle, the kiteboard
becomes more flexible and gets noticeably more comfortable. The kiteboard is faster to drive, even in rough choppy water.

UV-Safe Graphics

The glossy finish of the kiteboard is provided with an UV-protection. Even many hours in the blazing sun will not harm your kiteboard and
the colors will keep shining like the first day. Tag.

Straps, Pads and Fins

The SPLEENE straps, pads and fins are perfectly matched to SPLEENE Kiteboards. The pads are anatomically adapted to the foot and
provide extra good support with a toe edge. With the straps we offer the Standard Straps with velcro and the Pro Straps with ratchets. All
straps allow different mounting positions and can be individually adjusted. The SPLEENE Kiteboarding fins are made of extra hard G10
material for best performance.

Weight 8.9 lbs
Dimensions 57.5 × 19 × 1.5 in
Country/Region of manufacturing

Germany

Shopping Cart
Scroll to Top