Radical Style Line RS WAKE

Original price was: $659.00.Current price is: $527.00.

RS WAKE 38 : 138 x 42,5 cm 3,4 kg
All kiteboards come with a handle and a set of 4 fins

Availability: 1 in stock

SKU: SpRSWK Category: Tag:

Get ready to pop!


Strap your boots on and send it hard!

The SPLEENE RS WAKE is made for action, no compromise!

The RS WAKE is made for everything that happens above the waterline!

The Spleene RS WAKE is stiffer than the regular RS, has less flex and gives maximum power for freestyle and wakestyle kiteboarding.

Range of use of the SPLEENE RS WAKE

Highlights of the RS WAKE in detail

Freestyle, Wakestyle, Big Air

Like the regular RS, the RS WAKE has one goal above all else – to take you up in the air with maximum power and set you down again in the best possible way. The RS WAKE kiteboard is uncompromisingly geared towards freestyle and wakestyle action and was designed in all details for this use.

The Performance Shape, the 3-Stage-Rocker and the Power Grip Channel create the ultimate tool for your freestyle and wakestyle action. You have a powerful and robust kiteboard with a stiff setup and ultra-direct feedback. Your landings will be as soft as butter and even your freeride session will be a pleasure. The heavy-duty grindbase makes the bottom almost indestructible – no matter where you go over it. Additional layers on the WAKE as well as reinforced inserts make the board extremely durable.

Very good upwind and planing performances

The scoop line and the Advanced Jet Bottom accelerate the WAKE very quickly towards a high top speed. Best conditions to quickly power up after landing a jump. Going upwind is also dead easy with the WAKE, you are faster back upwind to send your next jump!

Radical setup

Torsion forces and flex are minimised so the RS WAKE remains stable even in extreme conditions. You can get a lot of pressure on the edge, a very good loading as well as breaking down your kiteboard with board pressure.

Enormous pop

The optimised tips give much surface to edge hard, the stiff setup maximises load and recovery speed. All together, these characteristics result in the enormous pop of the RS WAKE.

High agility

The Advanced Jet Bottom as well as the optimised outline create the high agility and looseness of the RS WAKE. Additionally, the Advanced Jet Bottom gives always best control and guidance, without limiting the kiteboarder.

No Spray

The rails of the RS Kiteboard are shaped with a tucked under edge, a bend in the rounded rail at the center section. That eliminates any spray. In addition, the kiteboard rides smoother through chop.

Cable-Park genes

You enjoy cable parks? The RS WAKE too! When designing the RS WAKE it was always the goal to have a kiteboard that works perfectly on the cable. The Power Grip Bottom and Performance Shape make it possible. You can use the RS WAKE uncompromisingly as a wakeboard. Remove the fins and off you go’. Thanks to the heavy-duty grindbase it’s easy to get over obstacles. The RS WAKE inserts are reinforced to support boots, prevent damages on the connection, even if high forces apply.

What’s the Technology behind the RS WAKE?

Carbon X-Layer

All RS Kiteboards have diagonally arranged carbon stripes, which radically eliminate torsion and generate clearly more Pop.

Advanced Jet Bottom

This Shape-Detail describes a double concave channel on the base side of the board. It allows the board to plane more freely and earlier. The profile of the double concave is not a simple radius. The Spleene developed Advanced Jet Bottom has a parabolic shape, Compared to a normal double concave the Advanced Jet Bottom provides significantly more “edge bite” as it channels the waterflow along its edges. Especially in choppy conditions the difference is very noticeable. When
landing the water surface will be broken up by the bottom of the board and allows a smooth landing.

Beveled Rail

A slightly lift edgewise at the base side which generates a lot more comfort. Kiteboarders benefit from this shape especially in choppy conditions.

Stepless 3D Deck

Stepless 3D-Shape on top side, All transitions are without any step. This results simultaneously in a clear reduction of weight.

Wood Core

Il Spleene RS Line kiteboards are produced with a form-glued, CNC-milled woodcore, The woodcore is additionally reinforced around the inserts.

Weight 7.5 lbs
Dimensions 54.5 × 17 × 1.5 in
Country/Region of manufacturing

Germany

Shopping Cart
Scroll to Top